Products
- Amplifiers (92)
- Headphone Amplifiers (5)
- Integrated (25)
- Phono Pre (15)
- Power Amps (31)
- Pre-Amplifiers (15)
- Analog (158)
- Accessories (35)
- Cartridges (51)
- Phono Cables (16)
- Record Cleaners (2)
- Stylus Only (6)
- Tonearms (16)
- Turntables (32)
- Brochures and Manuals (311)
- Cables (136)
- Bulk Cable (16)
- Digital Cables (21)
- Ethernet Cable (2)
- Interconnect RCA (22)
- Interconnect XLR (19)
- Phono Cables (14)
- Power Cords (23)
- Single Wire (6)
- Speaker Cable (24)
- USB Cable (6)
- Classic Audio (5)
- Digital Playback (19)
- CD Players (6)
- CD Transports (1)
- DAC's (14)
- Media Servers (11)
- Estate Sales (20)
- Free Shipping (484)
- Grounding Blocks (2)
- Grounding Blocks (2)
- Honor Roll (56)
- Hot Deals (107)
- New This Month (24)
- Parts (80)
- Power Cond/Filters (9)
- Racks / Stands (89)
- Accessories (9)
- Amplifier Stands (3)
- Audio Racks (63)
- APOLLO STORM (18)
- EVOQUE DESIGN EDITION (24)
- EVOQUE SE 2 (12)
- REFERENCE SERIES (8)
- Speaker Stands (20)
- Speakers (46)
- Bookshelf (11)
- Center Channels (6)
- Floorstanding (19)
- In Wall (4)
- Rear Channels (1)
- Subwoofers (6)
- Uncategorized (1)
Product Categories
Product Brands
The original Te Kaitora cartridge was the result of collaboration between Dynavector Japan and Dynavector New Zealand. The Te Kaitora allowed analogue enthusiasts to embark on a voyage of discovery to the outer limits of vinyl reproduction.
The improved Te Kaitora Rua continues the journey by incorporating many of the newest features of its Dynavector stable-mates, the XV-1s and XX-2. The Te Kaitora Rua has even managed to improve on the original’s silk-like treble and openness.
Note: Te Kaitora means “The Discoverer” in the language of the NZ Maori people, Rua, is “the second version”.
The wire for the coil has been changed to the PCOCC copper wire from the silver wire. It sounds a much smoother and has a much better musical performance.
A titanium headpiece for maximum ridgity along with a miniature stainless steel bolt coupling the front and rear yokes to the magnetic circuit assembly.
A 6mm long boron cantilever with the Pathfinder (PF) line contact stylus as used with both Dynavector XV-1s and XX-2.
The ingenious square shaped armature and matching square shaped aperture in the front yoke providing much improved linearity in the magnetic flux distribution.
Alnico magnets are used for high magnetic flux density.
Improvements
- The wire for the coil has been changed to the PCOCC copper wire from the silver wire. It sounds a much smoother and has a much better musical performance.
- A titanium headpiece for maximum ridgity along with a miniature stainless steel bolt coupling the front and rear yokes to the magnetic circuit assembly.
- A 6mm long boron cantilever with the Pathfinder (PF) line contact stylus as used with both Dynavector XV-1s and XX-2.
- The ingenious square shaped armature and matching square shaped aperture in the front yoke providing much improved linearity in the magnetic flux distribution.
- Alnico magnets are used for high magnetic flux density.
Type | low output moving coil cartridge with flux damper and alnico magnet |
Output Voltage | 0.26mV (at 1KHz, 5cm/sec.) |
Channel Separation | 30 dB (at 1KHz) |
Channel balance | 1.0 dB (at 1KHz) |
Frequency response | 20 – 20,000Hz (± 1dB) |
Compliance | 10 mm/N |
Tracking force | 1.8 – 2.2 g |
Impedance | 6 ohms |
Recommended load impedance | > 30 ohms |
Cantilever | 6mm length solid boron |
Stylus tip | PF Line contact shape, stylus radius: 7 x 30 micron |
Weight | 9.8 g |
Related products
-
Free Shipping
Hana Cartridges MH
$1,480.00 Add to cart -
Free Shipping
Dynavector DV DRT XV–1s Phono Cartridge
$6,700.00 Add to cart -
Free Shipping
Nagaoka MP-100 Cartridge
$179.95 Add to cart -
Free Shipping
ABIS / Sorane Tonearm 1.2
From: $2,200.00 -
Free Shipping
Nagaoka MP-300 Cartridge
$974.95 Add to cart -
ON SALE
Free Shipping
Edwards Audio Jelco Turntable
$859.95$515.97 Add to cart
Reviews